About Thermo Rheometers and viscometers     Contact Us Impressum
   HAAKE Rheometer Firmware
 Firmware versions overview

The lists below shows the current (i.e. latest) firmware version numbers of HAAKE Rheometers and Temperature Control Units (Circulators)

Current instruments:

Instrument MicroProcessor Firmware version Released
MARS 60 μP1 (Box microcontroller) 50.25.000 25.09.2017 new
μP2 (Box DSP) 50.22.000 25.09.2017 new
μP3 (Stand microcontroller) 61.05.000 24.03.2017  
MARS 40 μP1 (Box microcontroller) 50.25.000 25.09.2017 new
μP2 (Box DSP) 50.22.000 25.09.2017 new
μP3 (Stand microcontroller) 61.05.000 24.03.2017  
MARS III μP1 (Box microcontroller) 50.23.000 09.11.2016  
μP2 (Box DSP) 50.18.000 03.06.2016  
μP3 (Stand microcontroller) 50.25.000 09.11.2016  
MARS I μP1 (Box microcontroller) 50.23.000 09.11.2016  
μP2 (Box DSP) 50.18.000 03.06.2016  
μP3 (Stand microcontroller) 50.25.000 09.11.2016  
Viscotester iQ μP1 (microcontroller) 01.11.000 12.10.2016  
μP2 (microcontroller) 01.09.000 12.10.2016  
Viscotester iQ Air μP1 (microcontroller) 02.01.000 12.10.2016  
μP2 (microcontroller) 02.02.000 12.10.2016  
       
MARS II μP1 (C-Box microcontroller) 13.02.001 03.09.2013  
μP2 (C-Box DSP) 11.01.000 05.08.2013  
μP3 (M-Box microcontroller) 12.04.000 15.11.2012  
RS6001 μP1 (microcontroller) 04.01.000 07.06.2013
μP2 (DSP) 11.01.000 07.06.2013
μP3 (KB1 remote control) 02.00.000 26.09.2000
RS3001 μP1 (microcontroller) 04.01.000 28.04.2014  
μP2 (DSP) 11.01.000 28.04.2014  
μP3 (KB1 remote control) 02.00.000 26.09.2000  
RS6000 μP1 (microcontroller) 03.03.000 26.04.2012
μP2 (DSP) 10.10.000 10.09.2012  
μP3 (KB1 remote control) 02.00.000 26.09.2000
RS3000 μP1 (microcontroller) 03.00.000 09.08.2010  
μP2 (DSP) 10.07.000 23.10.2008  
μP3 (KB1 remote control) 02.00.000 26.09.2000  
RS600, RS300 μP1 (microcontroller) 03.00.000 22.02.2011
μP2 (DSP) 10.09.000 22.02.2011
μP3 (KB1 remote control) 02.00.000 26.09.2000
RS1 (B) μP1 (microcontroller) 02.16.001 14.08.2012  
μP2 (DSP) 02.01.005 24.05.2007  
μP3 (KB1 remote control) 02.00.000 26.09.2000  
RS1 (A) μP1 (microcontroller) 02.12.000 16.05.2006
μP2 (DSP) 02.00.013
μP3 (KB1 remote control) 02.00.00 26.09.2000
RV1 μP1 (microcontroller) 03.04.000 24.09.2012  
μP3 (KB1 remote control) 02.00.00 26.09.2000  
         
       
UTMC   01.02.000 09.07.2014  
UTC 03.00.001 01.04.2008
CTC  
TC501 110

Circulators

Instruments Firmware for Firmware version Released  
ACCEL 500 Recirculator chiller 095441.3H 29.03.2012  
SCxxx & ACxxx Circulator head 095441.2B 13.10.2011
PCxxx Circulator head 095613.1H 17.11.2011  

Older instruments:

Instrument MicroProcessor Firmware version Released  
RS150 μP1 13.03    
  μP2 13.20    
RS80 μP1 13.01    
  μP2 13.20    
RS75 μP1 13.01    
  μP2 13.20    
RT20 μP1 13.01    
  μP2 13.20    
RT10 μP1 10.8    
  μP2 10.0    
         
TC500        
TC81   48    
TC80   32    


 MARS 60 Firmware

The current MARS 60 firmware versions are:
 
MicroProcessor Firmware version Released
μP1 (Box microcontroller) 50.25.000 25.09.2017
μP2 (Box DSP) 50.22.000 25.09.2017
μP3 (Stand microcontroller) 61.05.000 24.03.2017

The firmware is available for download in two files, the first file contains the firmware for the control-box (BOX), the second file contains the firmware for the stand (STAND).
 

Please carefully read the following document BEFORE updating the firmware!

 MARS 40 Firmware

The current MARS 40 firmware versions are:
 
MicroProcessor Firmware version Released
μP1 (Box microcontroller) 50.25.000 25.09.2017
μP2 (Box DSP) 50.22.000 25.09.2017
μP3 (Stand microcontroller) 61.05.000 24.03.2017

The firmware is available for download in two files, the first file contains the firmware for the control-box (BOX), the second file contains the firmware for the stand (STAND).
 

Please carefully read the following document BEFORE updating the firmware!

 MARS III Firmware

The current MARS III firmware versions are:
 
MicroProcessor Firmware version Released
μP1 (Box microcontroller) 50.23.000 09.11.2016
μP2 (Box DSP) 50.18.000 03.06.2016
μP3 (Stand microcontroller) 50.25.000 09.11.2016

The firmware is available for download in two files, the first file contains the firmware for the control-box (BOX), the second file contains the firmware for the stand (STAND).
 

Please carefully read the following document BEFORE updating the firmware!

 MARS I Firmware

The current MARS I firmware versions are:
 
MicroProcessor Firmware version Released
μP1 (Box microcontroller) 50.23.000 09.11.2016
μP2 (Box DSP) 50.18.000 03.06.2016
μP3 (Stand microcontroller) 50.25.000 09.11.2016

The firmware is available for download in two files, the first file contains the firmware for the control-box (BOX), the second file contains the firmware for the stand (STAND).
 

The following document gives an overview over the changes in the MARS I firmware

 Viscotester iQ Firmware

The current Viscotester iQ firmware versions are:

MicroProcessor Firmware version Released
μP1 (microcontroller) 01.11.000 12.10.2016
μP2 (microcontroller) 01.09.000 12.10.2016

The firmware is available for download in one zip file, which contains the two firmware files
for the two microcontroller plus the HMI update files.

PLEASE NOTE: Both firmware files and the HMI file MUST be updated.

The Viscotester iQ Update Tool version 1.5.0.2 or newer must be used to update the firmware and the HMI.
The Viscotester iQ Update Tool can be downloaded using the following link.

  • Download Viscotester iQ Update Tool (File: VTIQ_Update_Tool_1502.zip, 488 kb)

    PLEASE NOTE: The Viscotester iQ Update Tool is part of the RheoWin installation and also available on the Viscotester iQ RheoApp USB flash drive.

The following document gives an overview over the changes in the VTiQ firmware

 Viscotester iQ Air Firmware

The current Viscotester iQ Air firmware versions are:

MicroProcessor Firmware version Released
μP1 (microcontroller) 02.01.000 12.10.2016
μP2 (microcontroller) 02.02.000 12.10.2016

The firmware is available for download in one zip file, which contains the two firmware files
for the two microcontroller plus the HMI update files.

PLEASE NOTE: Both firmware files and the HMI file MUST be updated.

The Viscotester iQ Update Tool version 1.5.0.2 or newer must be used to update the firmware and the HMI.
The Viscotester iQ Update Tool can be downloaded using the following link.

  • Download Viscotester iQ Update Tool (File: VTIQ_Update_Tool_1502.zip, 488 kb)

    PLEASE NOTE: The Viscotester iQ Update Tool is part of the RheoWin installation and also available on the Viscotester iQ RheoApp USB flash drive.

The following document gives an overview over the changes in the VTiQ Air firmware

 MARS II Firmware

The current MARS II firmware versions are:
 
MicroProcessor Firmware version Released
μP1 (C-Box microcontroller) 13.02.001 03.09.2013
μP2 (C-Box DSP) 11.01.000 05.08.2013
μP3 (M-Box microcontroller) 12.04.000 15.11.2012

The firmware is available for download in two files, the first file contains the firmware for the control-box (C-Box), the second file contains the firmware for the stand (M-Box).
 

  • Download MARS C-Box firmware
    (File: UPD_MARS_CBOX_13_02_001_Dsp_11_01_000.zip, 371 kb)
    PLEASE NOTE : RheoWin 4.41.0000  or newer is needed for this firmware to work properly
     

  • Download MARS M-Box firmware
    (File: UPD_MARS2_MBOX_12_04_000.zip, 133 kb)
    PLEASE NOTE : the previous file UPD_MARS_MBOX_12_03_000.zip will NOT work with the Firmware updater in RheoWin 4.10.0000 or newer. This new file however will work with older RheoWin versions!

The following document gives an overview over the changes in the MARS II firmware

 RS6000 and RS6001 Firmware

Please note: RS6000 build after 30.04.2013 are equipped with updated electronic hardware and internally called RS6001 (instead of RS6000). The difference between the two versions is only visible from the RheoWin diagnosis window. It is NOT possible to use RS6001 firmware for the RS6000 and vice versa (the firmware updater will allow to do this).

The current RS6001 firmware versions are:
MicroProcessor Firmware version Released
μP1 (microcontroller) 04.01.000 07.06.2013
μP2 (DSP) 11.01.000 07.06.2013
μP3 (KB1 remote control) 02.00.000 26.09.2000

The firmware is available for download in one file which contains both the microcontroller
and the DSP firmware.
The KB1 remote control is optional, there is no update available for the KB1.

Please carefully read the following document BEFORE updating the firmware!


The current RS6000 firmware versions are:
MicroProcessor Firmware version Released
μP1 (microcontroller) 03.03.000 26.04.2012
μP2 (DSP) 10.10.000 10.09.2012
μP3 (KB1 remote control) 02.00.000 26.09.2000

The firmware is available for download in one file which contains both the microcontroller
and the DSP firmware.
The KB1 remote control is optional, there is no update available for the KB1.

Please carefully read the following document BEFORE updating the firmware!

 RS3000 and RS3001 Firmware

Please note: RS3000 build after 28.04.2014 are equipped with updated electronic hardware and internally called RS3001 (instead of RS3000). The difference between the two versions is only visible from the RheoWin diagnosis window. It is NOT possible to use RS3001 firmware for the RS3000 and vice versa (the firmware updater will allow to do this).

The current RS3001 firmware versions are:
MicroProcessor Firmware version Released
μP1 (microcontroller) 04.01.000 28.04.2014
μP2 (DSP) 11.01.000 28.04.2014
μP3 (KB1 remote control) 02.00.000 26.09.2000

The firmware is available for download in one file which contains both the microcontroller
and the DSP firmware.
The KB1 remote control is optional, there is no update available for the KB1.


 

The current RS3000 firmware versions are:
MicroProcessor Firmware version Released
μP1 (microcontroller) 03.00.000 09.08.2010
μP2 (DSP) 10.07.000 23.10.2008
μP3 (KB1 remote control) 02.00.000 26.09.2000

The firmware is available for download in one file which contains both the microcontroller
and the DSP firmware.
The KB1 remote control is optional, there is no update available for the KB1.


 RS600, RS300 Firmware

The current RS600 and RS300 firmware versions are:
MicroProcessor Firmware version Released
μP1 (microcontroller) 03.00.000 22.02.2011
μP2 (DSP) 10.09.000 22.02.2011
μP3 (KB1 remote control) 02.00.000 26.09.2000

The firmware is available for download in one file which contains both the microcontroller
and the DSP firmware.
The KB1 remote control is optional, there is no update available for the KB1.


 RS1 (B) Firmware

The current RS1 (B) firmware versions are:
MicroProcessor Firmware version Released
μP1 (microcontroller) 02.16.001 14.08.2012
μP2 (DSP) 02.01.005 24.05.2007
μP3 (KB1 remote control) 02.00.000 26.09.2000

The firmware is available for download in one file which contains both the microcontroller
and the DSP firmware.
The KB1 remote control is optional, there is no update available for the KB1.
 


 RS1 (A) Firmware

The current RS1 (A) firmware versions are:

MicroProcessor Firmware version Released
μP1 (microcontroller) 02.12.000 16.05.2006
μP2 (DSP) 02.00.013
μP3 (KB1 remote control) 02.00.000 26.09.2000

The firmware is available for download in one file which contains both the microcontroller
and the DSP firmware.
The KB1 remote control is optional, there is no update available for the KB1.
 

September 24, 2007:
A problem was discovered in the above version, for the time being please use the following
older firmware version:

 

 RV1 Firmware

The current RV1 firmware versions are:

MicroProcessor Firmware version Released
μP1 (microcontroller) 03.04.000 24.09.2012
μP3 (KB1 remote control) 02.00.000 26.09.2000

The firmware is available for download in one file which contains the microcontroller firmware.
The KB1 remote control is optional, there is no update available for the KB1.
 


 UTMC Firmware

The current UTMC firmware version is:

Firmware version Released
01.02.000 09.07.2014

The firmware is available for download in one file. This version is compatible with all versions of the UTMC controller.
 

The following document gives an overview over the changes in the UTMC firmware


 UTC Firmware

The current UTC firmware version is:

Firmware version Released
03.00.001 01.04.2008

The firmware is available for download in one file. This version is compatible with all versions of the UTC controller.
 


 ACCEL Firmware

The current firmware version for the ACCEL circulators is:

Firmware version Released
095441.3H 29.03.2012

The firmware is available for download in one file.
 

PLEASE NOTE
- For firmware version 095441.3H RheoWin version 4.30.0015 or newer is needed.
- Updating the circulator firmware should be done by qualified personal only!!


 SCxxx and ACxxx Firmware

The current firmware version for the SCxxx and ACxxx circulators is:

Firmware version Released
095441.2B 13.10.2011

The firmware is available for download in one file.
 

PLEASE NOTE
- For firmware version 095441.2B RheoWin version 4.30.0015 or newer is needed.
- Updating the circulator firmware is only necessary when the current firmware version is 095441.2A (since that version is not compatible with RheoWin).
- Updating the circulator firmware should be done by qualified personal only!!


 PCxxx Firmware

The current firmware version for the PCxxx circulators is:

Firmware version Released
095441.2B 13.10.2011

The firmware is available for download in one file.
 

PLEASE NOTE
- For firmware version 095613.1H RheoWin version 4.30.0015 or newer is needed.
- Updating the circulator firmware should be done by qualified personal only!!


©2017 Thermo Fisher Scientific. All rights reserved.  

Last updated on: 25.09.2017 by Jint Nijman